// --------------------------------------------------------------------------------
// Name        : RectPlacement.h
// Description : A class that allocates subrectangles into power-of-2 rectangles
//               (C) Copyright 2000-2002 by Javier Arevalo
//               This code is free to use and modify for all purposes
// --------------------------------------------------------------------------------

#ifndef _RECT_PLACEMENT_H_
#define _RECT_PLACEMENT_H_


#include <vector>

// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------

class CRectPlacement
{
  public:

    // Helper classes
    struct TPos
    {
      int x, y;

      TPos() { }
      TPos(int _x, int _y): x(_x), y(_y) { }

      bool operator ==(const TPos &p) const { return x == p.x && y == p.y; }
    };

    struct TRect: public TPos
    {
      int w, h;

      TRect() { }
      TRect(int _x, int _y, int _w, int _h): TPos(_x, _y), w(_w > 0? _w : 0), h(_h > 0? _h : 0) { }

      bool Contains   (const TPos &p)  const { return (p.x >= x && p.y >= y &&
                                                       p.x < (x+w) && p.y < (y+h)); }
      bool Contains   (const TRect &r) const { return (r.x >= x && r.y >= y &&
                                                       (r.x+r.w) <= (x+w) && (r.y+r.h) <= (y+h)); }
      bool Intersects (const TRect &r) const { return w > 0 && h > 0 && r.w > 0 && r.h > 0 &&
                                                      ((r.x+r.w) > x && r.x < (x+w) &&
                                                       (r.y+r.h) > y && r.y < (y+h)); }

    //  Greater rect area. Not as good as the next heuristic
    //  static bool Greater(const TRect &a, const TRect &b) { return a.w*a.h > b.w*b.h; }

      // Greater size in at least one dim.
      static bool Greater(const TRect &a, const TRect &b) { return (a.w > b.w && a.w > b.h) ||
                                                                   (a.h > b.w && a.h > b.h); }
    };

    // ---------------------

    typedef std::vector<TPos>  CPosArray;
    typedef std::vector<TRect> CRectArray;

    // ---------------------

    CRectPlacement()                    { Init(); }
    ~CRectPlacement()                   { End(); }

    void      Init    (int w = 1, int h = 1);
    void      End     ();
    bool      IsOk    ()                      const { return m_size.w > 0; }

    int       GetW    ()                      const { return m_size.w; }
    int       GetH    ()                      const { return m_size.h; }
    long      GetArea ()                      const { return m_area; }
    long      GetTotalArea ()                 const { return m_size.w*m_size.h; }

    bool AddAtEmptySpotAutoGrow (TRect *pRect, int maxW, int maxH);

  private:
    TRect       m_size;
    CRectArray  m_vRects;
    CPosArray   m_vPositions;
    long        m_area;

    // ---------------------

    bool IsFree                 (const TRect &r) const;
    void AddPosition            (const TPos &p);
    void AddRect                (const TRect &r);
    bool AddAtEmptySpot         (TRect &r);
};


#endif //_RECT_PLACEMENT_H_
 

// ----------------------------------------------------------------------------------------
// Name        : RectPlacement.cpp
// Description : A class that fits subrectangles into a power-of-2 rectangle
//               (C) Copyright 2000-2002 by Javier Arevalo
//               This code is free to use and modify for all purposes
// ----------------------------------------------------------------------------------------

/*
  You have a bunch of rectangular pieces. You need to arrange them in a 
  rectangular surface so that they don't overlap, keeping the total area of the 
  rectangle as small as possible. This is fairly common when arranging characters 
  in a bitmapped font, lightmaps for a 3D engine, and I guess other situations as 
  well.

  The idea of this algorithm is that, as we add rectangles, we can pre-select 
  "interesting" places where we can try to add the next rectangles. For optimal 
  results, the rectangles should be added in order. I initially tried using area 
  as a sorting criteria, but it didn't work well with very tall or very flat 
  rectangles. I then tried using the longest dimension as a selector, and it 
  worked much better. So much for intuition...

  These "interesting" places are just to the right and just below the currently 
  added rectangle. The first rectangle, obviously, goes at the top left, the next 
  one would go either to the right or below this one, and so on. It is a weird way 
  to do it, but it seems to work very nicely.

  The way we search here is fairly brute-force, the fact being that for most off-
  line purposes the performance seems more than adequate. I have generated a 
  japanese font with around 8500 characters and all the time was spent generating 
  the bitmaps.

  Also, for all we care, we could grow the parent rectangle in a different way 
  than power of two. It just happens that power of 2 is very convenient for 
  graphics hardware textures.

  I'd be interested in hearing of other approaches to this problem. Make sure
  to post them on http://www.flipcode.com
*/

#include "RectPlacement.h"

// --------------------------------------------------------------------------------
// Name        : 
// Description : 
// --------------------------------------------------------------------------------
void CRectPlacement::Init    (int w, int h)
{
  End();
  m_size = TRect(0, 0, w, h);
  m_vPositions.push_back(TPos(0,0));
  m_area = 0;
}


// --------------------------------------------------------------------------------
// Name        : 
// Description : 
// --------------------------------------------------------------------------------
void CRectPlacement::End     ()
{
  m_vPositions.clear();
  m_vRects.clear();
  m_size.w = 0;
}

// --------------------------------------------------------------------------------
// Name        : IsFree
// Description : Check if the given rectangle is partially or totally used
// --------------------------------------------------------------------------------
bool CRectPlacement::IsFree (const TRect &r) const
{
  if (!m_size.Contains(r))
    return false;
  for (CRectArray::const_iterator it = m_vRects.begin();
       it != m_vRects.end();
       ++it)
    if (it->Intersects(r))
      return false;
  return true;
}


// --------------------------------------------------------------------------------
// Name        : AddPosition
// Description : Add new anchor point
// --------------------------------------------------------------------------------
void CRectPlacement::AddPosition    (const TPos &p)
{
  // Try to insert anchor as close as possible to the top left corner
  // So it will be tried first
  bool bFound = false;
  CPosArray::iterator it;
  for (it = m_vPositions.begin();
       !bFound && it != m_vPositions.end();
       ++it)
  {
    if (p.x+p.y < it->x+it->y)
      bFound = true;
  }
  if (bFound)
    m_vPositions.insert(it, p);
  else

    m_vPositions.push_back(p);
}

// --------------------------------------------------------------------------------
// Name        : AddRect
// Description : Add the given rect and updates anchor points
// --------------------------------------------------------------------------------
void CRectPlacement::AddRect  (const TRect &r)
{
  m_vRects.push_back(r);
  m_area += r.w*r.h;

  // Add two new anchor points
  AddPosition(TPos(r.x, r.y+r.h));
  AddPosition(TPos(r.x+r.w, r.y));
}

// --------------------------------------------------------------------------------
// Name        : AddAtEmptySpot
// Description : Add the given rectangle
// --------------------------------------------------------------------------------
bool CRectPlacement::AddAtEmptySpot   (TRect &r)
{
  // Find a valid spot among available anchors.

  bool bFound = false;
  CPosArray::iterator it;
  for (it = m_vPositions.begin();
       !bFound && it != m_vPositions.end();
       ++it)
  {
    TRect Rect(it->x, it->y, r.w, r.h);

    if (IsFree(Rect))
    {
      r = Rect;
      bFound = true;
      break; // Don't let the loop increase the iterator.
    }
  }
  if (bFound)
  {
    // Remove the used anchor point
    m_vPositions.erase(it);

    // Sometimes, anchors end up displaced from the optimal position
    // due to irregular sizes of the subrects.
    // So, try to adjut it up & left as much as possible.
    for (int x = 1; x <= r.x; x++)
      if (!IsFree(TRect(r.x - x, r.y, r.w, r.h)))
        break;
    for (int y = 1; y <= r.y; y++)
      if (!IsFree(TRect(r.x, r.y - y, r.w, r.h)))
        break;
    if (y > x)
      r.y -= y-1;
    else

      r.x -= x-1;
    AddRect(r);
  }
  return bFound;
}


// --------------------------------------------------------------------------------
// Name        : AddAtEmptySpotAutoGrow
// Description : Add a rectangle of the given size, growing our area if needed
//               Area grows only until the max given.
//               Returns the placement of the rect in the rect's x,y coords
// --------------------------------------------------------------------------------

bool CRectPlacement::AddAtEmptySpotAutoGrow   (TRect *pRect, int maxW, int maxH)
{
  if (pRect->w <= 0)
    return true;

  int orgW = m_size.w;
  int orgH = m_size.h;

  // Try to add it in the existing space
  while (!AddAtEmptySpot(*pRect))
  {
    int pw = m_size.w;
    int ph = m_size.h;

    // Sanity check - if area is complete.
    if (pw >= maxW && ph >= maxH)
    {
      m_size.w = orgW;
      m_size.h = orgH;
      return false;
    }

    // Try growing the smallest dim
    if (pw < maxW && (pw < ph || ((pw == ph) && (pRect->w >= pRect->h))))
      m_size.w = pw*2;
    else
      m_size.h = ph*2;
    if (AddAtEmptySpot(*pRect))
      break;

    // Try growing the other dim instead
    if (pw != m_size.w)
    {
      m_size.w = pw;
      if (ph < maxW)
        m_size.h = ph*2;
    }
    else
    {
      m_size.h = ph;
      if (pw < maxW)
        m_size.w = pw*2;
    }

    if (pw != m_size.w || ph != m_size.h)
      if (AddAtEmptySpot(*pRect))
        break;

    // Grow both if possible, and reloop.
    m_size.w = pw;
    m_size.h = ph;
    if (pw < maxW)
      m_size.w = pw*2;
    if (ph < maxH)
      m_size.h = ph*2;
  }
  return true;
}
 

// ----------------------------------------------------------------------------------------
// Name        : Test.cpp
// Description : Test the RectPlacement class
//               (C) Copyright 2000-2002 by Javier Arevalo
//               This code is free to use and modify for all purposes
// ----------------------------------------------------------------------------------------

#include <stdio.h>
#include <algorithm>

#include "RectPlacement.h"

#define MAX_TEXTURE_W 256
#define MAX_TEXTURE_H 256

#define NUM_SUBRECTS  500
#define MIN_SUBRECT    15
#define MAX_SUBRECT    50


// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------

struct TSubRect: public CRectPlacement::TRect
{
  int n;      // Original index of this subrect, before sorting
  int nTex;   // Texture in which this subrect will be placed.

  TSubRect() { }
  TSubRect(int _w, int _h, int _n): TRect(0, 0, _w, _h), n(_n), nTex(0) { }
};

// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------

typedef std::vector<TSubRect>       CSubRectArray;
typedef std::vector<CRectPlacement> CTextureArray;

// --------------------------------------------------------------------------------
// Name        : CreateLetters
// Description : Here's where you calculate your rectangles,
// --------------------------------------------------------------------------------

void CreateLetters  (CSubRectArray &vecSubRects)
{
  vecSubRects.clear();

  // Let's just fill this with random stuff
  for (int i = 0; i < NUM_SUBRECTS; i++)
    vecSubRects.push_back(TSubRect((rand() % MAX_SUBRECT) + MIN_SUBRECT,
                                   (rand() % MAX_SUBRECT) + MIN_SUBRECT, i));
}

// --------------------------------------------------------------------------------
// Name        : CreateTextures
// Description : Create array of textures containing all subrects
// --------------------------------------------------------------------------------
void CreateTextures (CTextureArray &vecTextures, CSubRectArray &vecSubRects, int maxTexW, int maxTexH)
{
  // Sort the subRects based on dimensions, larger dimension goes first.
  std::sort(vecSubRects.begin(), vecSubRects.end(), CRectPlacement::TRect::Greater);

  // Generate the first texture
  vecTextures.clear();
  vecTextures.push_back(CRectPlacement());

  // Add all subrects
  for (CSubRectArray::iterator it = vecSubRects.begin();
       it != vecSubRects.end();
       ++it)
  {
    // We make sure we leave one pixel between subrects, so texels don't bleed with bilinear.
    CRectPlacement::TRect r(0, 0, it->w+1, it->h+1);

    // If an existing texture has actual space
    bool bPlaced = false;
    for (int i = 0; !bPlaced && i < vecTextures.size(); i++)
    {
      bPlaced = vecTextures[i].AddAtEmptySpotAutoGrow(&r, maxTexW, maxTexH);
      if (bPlaced)
        it->nTex = i;
    }

    // Try starting a new texture and fit the rect in there
    if (!bPlaced)
    {
      vecTextures.push_back(CRectPlacement());
      bPlaced = vecTextures[vecTextures.size()-1].AddAtEmptySpotAutoGrow(&r, maxTexW, maxTexH);
      if (bPlaced)
        it->nTex = vecTextures.size()-1;
      else
        printf("ERROR: Subrect is too big to fit in texture!", it->w, it->h);
    }

    // If correctly placed in a texture, the coords are returned in r.x and r.y
    // Store them.
    if (bPlaced)
    {
      it->x = r.x;
      it->y = r.y;
    }
  }
}

// --------------------------------------------------------------------------------
// Name        : main
// Description : heh
// --------------------------------------------------------------------------------
int main()
{
  CTextureArray vecTextures;
  CSubRectArray vecSubRects;

  CreateLetters(vecSubRects);
  CreateTextures(vecTextures, vecSubRects, MAX_TEXTURE_W, MAX_TEXTURE_H);

  {
    for (CSubRectArray::const_iterator it = vecSubRects.begin();
         it != vecSubRects.end();
         ++it)
    {
      printf("Subrect %d (originally %d), size %dx%d, goes into texture %d at pos %d,%d\n",
             it - vecSubRects.begin(), it->n, it->w, it->h, it->nTex, it->x, it->y);
    }
  }

  printf("Created a total of %d textures\n", vecTextures.size());
  {
    for (CTextureArray::const_iterator it = vecTextures.begin();
         it != vecTextures.end();
         ++it)
    {
      printf("  Texture %d, size %dx%d, Coverage %d / %d (%d%%)\n",
             it - vecTextures.begin(), it->GetW(), it->GetH(),
             it->GetArea(), it->GetTotalArea(), it->GetArea()*100/it->GetTotalArea());
    }
  }
  return 0;
}